FAQ ENTR™ Smart Door Lock

ENTR™ General

Will I be able to install ENTR™ on my existing front door?

The ENTR™ lock can be retro-fitted to most of available door types with ease. There’s no need to make any changes to your existing door or provide wiring for a power supply. Simply remove your existing cylinder and replace with ENTR™.  

Is it possible to operate two or more ENTR™ door units with a single Remote Control?

No. To ensure security, each Remote Control is specific to each ENTR™ smart lock system and can only operate it’s designated door unit.

What cylinder lengths are available?

The internal lengths start from 35mm and go up from there in 5 mm increments. External dimension are the same as a normal mechanical cylinder. For specific details, please contact your local dealer.

Do I have to order the same cylinder length as my old cylinder?

Yes, as the cylinder length should fit the door’s thickness. Pay attention to the shape of the escutcheons, which might require a longer cylinder dimension if it isn't flat.

Can I integrate an ENTR™ lock into an existing locking system?

Yes. ENTR™ is a retrofit locking system that fits on your existing door’s hardware and any Euro profile lock.

Can I get other, identically locking mechanical cylinders for an ENTR™ unit?

Yes. Please consult your local dealer regarding keyed alike or whatever your preferred combination is for the mechanical cylinder.

Is ENTR™ also suitable for multi-point locking systems integrated into the door hinge?

Yes, as long as the cylinder type is a Euro profile.

Is ENTR™ also suitable for use on external doors? Can I mount the door code/fingerprint module on an unprotected outer wall?

ENTR™ is suitable for external doors, as long as the electronic part of the door unit faces an interior. The door code/fingerprint modules are suitable for outdoor use, and can be mounted on the outer wall.

ENTR™ Battery

Will I be able to install ENTR™ on my existing front door?

The ENTR™ lock can be retro-fitted to most of available door types with ease. There’s no need to make any changes to your existing door or provide wiring for a power supply. Simply remove your existing cylinder and replace with ENTR™.  

Is it possible to operate two or more ENTR™ door units with a single Remote Control?

No. To ensure security, each Remote Control is specific to each ENTR™ smart lock system and can only operate it’s designated door unit.

What cylinder lengths are available?

The internal lengths start from 35mm and go up from there in 5 mm increments. External dimension are the same as a normal mechanical cylinder. For specific details, please contact your local dealer.

Do I have to order the same cylinder length as my old cylinder?

Yes, as the cylinder length should fit the door’s thickness. Pay attention to the shape of the escutcheons, which might require a longer cylinder dimension if it isn't flat.

Can I integrate an ENTR™ lock into an existing locking system?

Yes. ENTR™ is a retrofit locking system that fits on your existing door’s hardware and any Euro profile lock.

Can I get other, identically locking mechanical cylinders for an ENTR™ unit?

Yes. Please consult your local dealer regarding keyed alike or whatever your preferred combination is for the mechanical cylinder.

Is ENTR™ also suitable for multi-point locking systems integrated into the door hinge?

Yes, as long as the cylinder type is a Euro profile.

Is ENTR™ also suitable for use on external doors? Can I mount the door code/fingerprint module on an unprotected outer wall?

ENTR™ is suitable for external doors, as long as the electronic part of the door unit faces an interior. The door code/fingerprint modules are suitable for outdoor use, and can be mounted on the outer wall.

ENTR™ Smartphone App

Will I be able to install ENTR™ on my existing front door?

The ENTR™ lock can be retro-fitted to most of available door types with ease. There’s no need to make any changes to your existing door or provide wiring for a power supply. Simply remove your existing cylinder and replace with ENTR™.  

Is it possible to operate two or more ENTR™ door units with a single Remote Control?

No. To ensure security, each Remote Control is specific to each ENTR™ smart lock system and can only operate it’s designated door unit.

What cylinder lengths are available?

The internal lengths start from 35mm and go up from there in 5 mm increments. External dimension are the same as a normal mechanical cylinder. For specific details, please contact your local dealer.

Do I have to order the same cylinder length as my old cylinder?

Yes, as the cylinder length should fit the door’s thickness. Pay attention to the shape of the escutcheons, which might require a longer cylinder dimension if it isn't flat.

Can I integrate an ENTR™ lock into an existing locking system?

Yes. ENTR™ is a retrofit locking system that fits on your existing door’s hardware and any Euro profile lock.

Can I get other, identically locking mechanical cylinders for an ENTR™ unit?

Yes. Please consult your local dealer regarding keyed alike or whatever your preferred combination is for the mechanical cylinder.

Is ENTR™ also suitable for multi-point locking systems integrated into the door hinge?

Yes, as long as the cylinder type is a Euro profile.

Is ENTR™ also suitable for use on external doors? Can I mount the door code/fingerprint module on an unprotected outer wall?

ENTR™ is suitable for external doors, as long as the electronic part of the door unit faces an interior. The door code/fingerprint modules are suitable for outdoor use, and can be mounted on the outer wall.

ENTR™ Installation

Will I be able to install ENTR™ on my existing front door?

The ENTR™ lock can be retro-fitted to most of available door types with ease. There’s no need to make any changes to your existing door or provide wiring for a power supply. Simply remove your existing cylinder and replace with ENTR™.  

Is it possible to operate two or more ENTR™ door units with a single Remote Control?

No. To ensure security, each Remote Control is specific to each ENTR™ smart lock system and can only operate it’s designated door unit.

What cylinder lengths are available?

The internal lengths start from 35mm and go up from there in 5 mm increments. External dimension are the same as a normal mechanical cylinder. For specific details, please contact your local dealer.

Do I have to order the same cylinder length as my old cylinder?

Yes, as the cylinder length should fit the door’s thickness. Pay attention to the shape of the escutcheons, which might require a longer cylinder dimension if it isn't flat.

Can I integrate an ENTR™ lock into an existing locking system?

Yes. ENTR™ is a retrofit locking system that fits on your existing door’s hardware and any Euro profile lock.

Can I get other, identically locking mechanical cylinders for an ENTR™ unit?

Yes. Please consult your local dealer regarding keyed alike or whatever your preferred combination is for the mechanical cylinder.

Is ENTR™ also suitable for multi-point locking systems integrated into the door hinge?

Yes, as long as the cylinder type is a Euro profile.

Is ENTR™ also suitable for use on external doors? Can I mount the door code/fingerprint module on an unprotected outer wall?

ENTR™ is suitable for external doors, as long as the electronic part of the door unit faces an interior. The door code/fingerprint modules are suitable for outdoor use, and can be mounted on the outer wall.

ENTR™ Fingerprint reader

Will I be able to install ENTR™ on my existing front door?

The ENTR™ lock can be retro-fitted to most of available door types with ease. There’s no need to make any changes to your existing door or provide wiring for a power supply. Simply remove your existing cylinder and replace with ENTR™.  

Is it possible to operate two or more ENTR™ door units with a single Remote Control?

No. To ensure security, each Remote Control is specific to each ENTR™ smart lock system and can only operate it’s designated door unit.

What cylinder lengths are available?

The internal lengths start from 35mm and go up from there in 5 mm increments. External dimension are the same as a normal mechanical cylinder. For specific details, please contact your local dealer.

Do I have to order the same cylinder length as my old cylinder?

Yes, as the cylinder length should fit the door’s thickness. Pay attention to the shape of the escutcheons, which might require a longer cylinder dimension if it isn't flat.

Can I integrate an ENTR™ lock into an existing locking system?

Yes. ENTR™ is a retrofit locking system that fits on your existing door’s hardware and any Euro profile lock.

Can I get other, identically locking mechanical cylinders for an ENTR™ unit?

Yes. Please consult your local dealer regarding keyed alike or whatever your preferred combination is for the mechanical cylinder.

Is ENTR™ also suitable for multi-point locking systems integrated into the door hinge?

Yes, as long as the cylinder type is a Euro profile.

Is ENTR™ also suitable for use on external doors? Can I mount the door code/fingerprint module on an unprotected outer wall?

ENTR™ is suitable for external doors, as long as the electronic part of the door unit faces an interior. The door code/fingerprint modules are suitable for outdoor use, and can be mounted on the outer wall.